<!_Updated by Dana Foster - Fosters-investments.com--> Wilson Anchor Bolt Sleeve Company

Applications

Basic Use: The Wilson Anchor Bolt Sleeve is used as an in-place form to provide a grout pocket around an anchor bolt (Fig. 1 and 3) and is used to form a pocket into which a bolt may be grouted (Fig. 2). Also may be used where metal pipe Is objectionable due to rusting or cost. Use in food processing areas is not a problem due to the inert polyethylene.

Limitations: The Wilson Anchor Bolt Sleeve is not recommended where high heat is used, such as Inside an oven.

Figure 1

Figure 3